Onix Work –
Onboarding Success Center

Vi presenterer trinnvis veiledning
for å hjelpe din organisasjon til å lykkes med Onix Work

Easy to register and inspect equipment using Onix Inspection

Onix Inspection is an application for registering and inspection of equipment. Inspections can be done offline.
The application can be downloaded and used on laptops, phones and tablets. Onix Inspection can be used with RFID and QR marked equipment.

You can either perform a quick inspection, a mixed inspection or a full inspection.

  1. Quick inspection let you set a status, and then you are ready to upload. The finished document will be Quick Inspection (M).
  2. Inspection lets you add checklists to your inspection. When uploading finished inspection, the finished document(s) will become Inspection. You can add more than one equipment to Inspection, an Inspection will be created for each individual equipment, and the status, comment and checklist will be added to all equipment connected to the Inspection.
  3. Mixed inspection lets you quickly create quick inspection lists by giving statuses as equipment is added. The finished document will be Quick Inspection (M).

Onix Inspection can be downloaded from Onix Work to your PC, or from Play Store/Apple Store to your device.

See: Onix Inspection guide

Var denne informasjonen hjelpfull? Thanks for your feedback.
Artikkel-ID: #1500107
1500 characters remaining
Recent articles
© Onix AS 2019